subota, 30. srpnja 2011.

Croatian Center of Renewable Energy Sources (CCRES)




Croatian Center of Renewable Energy Sources (CCRES)


Created on 1988, the Croatian Center of Renewable Energy Sources (CCRES) is the umbrella organisation of the Croatian renewable energy industry, trade and research associations active in the sectors of photovoltaics, small hydropower, solar thermal, bioenergy, geothermal, ocean, concentrated solar power and wind energy.
CCRES defends the interests of independent, decentralised power, fuel and heat producers from renewable sources , promotes non discriminatory priority access to the energy grids and market, engages for robust national RES policies and support mechanisms, favouring well designed Feed-I
Furthermore, CCRES strengthens and rationalises the European research, demonstration and development efforts in all renewable energy technologies.

Introduction

Wind energy is now a mainstream source of electricity. Unlike conventional fuels, wind energy is a massive, indigenous power source, and it will never run out. It has no resource constraints: the ‘fuel’ is free and endless. On top of this, wind energy entirely avoids carbon costs, geo-political risk associated with supply and infrastructure constraints, and energy dependence on other countries. Europe has taken the lead in wind energy and has consolidated its position as global market leader.


“The European Commission is convinced that there is a huge potential for wind energy in Europe", Christopher Jones, European Commission, Introduction to Pure Power, November 200.

State of the art technology

In contrast to the windmills of the 19th century, a modern power generating wind turbine is designed to produce high-quality, network frequency electricity. Wind turbines can operate continuously, unattended, with low maintenance, and some 120,000 hours of active operation can be expected over a design lifetime of 20 years. By comparison, a typical car engine has a design lifetime of the order of 6,000 hours.

Since the early 1980s, the capacity of an individual turbine has increased by a factor of over 200 to up to 6 MW. Larger turbines and improved cost effectiveness has brought down the costs of turbines. Modular and quick to install, wind turbines range in size from a few kilowatts (kW) to 6 MW. Wind turbines are highly reliable, with operating availabilities (the proportion of the time in which they are available to operate) of 98%. No other electricity generating technology has a higher availability.

Many developments and improvements have taken place since the early 1980s but the basic architecture of the mainstream design has changed little. The rotors of most wind turbines face into the wind, and actively ‘yaw’ to follow changes in wind direction. Wind farm developments can be as small as a single turbine or as large as several hundred megawatts (thousand kW). Sited in an area with a good wind resource, a single 1 MW turbine can power 650 households.


Key advantages of wind power:

  • Clean energy - no resulting carbon dioxide emissions
  • Low cost – at optimum locations, wind can be competitive with nuclear, coal and even gas, on a level playing field
  • Wind energy is an expanding source of sustainable jobs
  • Rapid deployment – quick to install
  • Fuel is free, abundant and inexhaustible
  • Provides a hedge against fuel price volatility
  • Security of supply - avoids reliance on imported fuels
  • Provides bulk power equivalent to conventional sources
  • Land friendly - agricultural/industrial activities can continue around it

The European wind power industry

  • Employs around 192,000 people (2009 figures)
  • Saw investments worth €13 billion in 2009
  • Over 10 GW of wind power capacity was installed in 2009 – 23% more than in 2008
  • In 2009, for the second year running, more wind power was installed than any other power generating technology, accounting for 39% of total new installations
  • Produces 4.8% of the EU’s electricity (end 2009)
  • Over 40,000 wind turbines are installed today
  • Over 75,000 MW of capacity is installed in total – over 2,000 MW of which is offshore
  • Wind energy saves Europe €6 billion per year in avoided CO2 costs, equivalent to taking 25% of cars in the EU off the road
  • In 2008, wind power avoided fuel costs of €6.5 billion
  • Wind power can drive down electricity prices

Development potential of wind energy

The wind power industry has been growing at an impressive rate, within and outside of Europe. The latest industry figures for the EU wind energy market show that cumulative wind power capacity increased by 23% to 74,767 MW (end 2009), up from 64,935 MW at the end of 2008. 10,163 MW of wind power capacity were installed last year, representing a wind turbine manufacturing turnover of some €13 billion.

Wind power has the potential to make a major contribution to the Europe’s increasing energy demand. EWEA projects that 230 GW (including 40 GW offshore) of wind energy could be generating 14-17% of the EU’s electricity need by 2020. In the process it would save an annual 333 million tonnes of carbon dioxide by 2020, €8.3 billion a year in avoided CO2 costs and €28 billion a year in avoided fuel costs.

What needs to happen?

The 2009 Renewable Energy Directive, which sets a target of 20% renewables in the EU by 2020, must be effectively and rapidly implemented by Member States. To meet this target, the share of renewable electricity in the EU must increase from 15% to at least 34% by 2020.

Wind energy needs an extended and upgraded electricity system – with interconnections between EU countries and links to offshore wind farms - and greater competition in the electricity market in order to fulfil its potential. By 2020, power capacity equivalent to 42% of the EU’s current capacity needs to be built to replace ageing power plants and meet the expected increase in demand – this is the ideal opportunity to equip grids with the technology they need to bring huge amounts of wind power online.

Polluters must pay for emitting CO2, either through carbon taxes or an Emissions Trading System with full auctioning of allowances.

Research funding for wind energy must be increased substantially.

Introduction

Solar Thermal Electricity (STE) technology, also called Concentrated Solar Power (CSP), provides clean and reliable power from 10kW to 200 MW and even more. The power commercial solar thermal power plants were built in the 80’s and the current global installed capacity is almost 900 MW.

In Europe 11 plants with an installed capacity of more than 430 MW are currently connected to the grid, another 16 plants are under construction and more than 30 projects are pre-assigned.

At different stages of technical development, there are 4 main STE technologies to produce electricity from the sun: parabolic troughs, tower technology, Dish Stirling and Fresnel. Each technology will progress depending on favorable policy framework, capacity to reduce generation costs and to satisfy the specific needs of the power market.

Parabolic Troughs

In Europe the installed capacity of parabolic trough plants operating reaches 400 MW and 650 MW are under construction. Parabolic trough technology is the most mature available on the market with a track record since the 1980’s. The typical size of a parabolic trough plant is 50 MW in Europe, specific land requirements like flat, sunny areas are necessary.

Tower Technology

The first commercial tower plant has begun operation in June 2007 in Spain (11 MW) and a second one is now operating (20MW). The typical size for a tower plant is up to 50 MW, and specific land requirements are less restrictive than for parabolic troughs.

Dish Stirling

In Europe only pilot plants are in operation so far. The typical size of a Stirling module is 10kW to 25kW, the size of a plant can vary accordingly to any demand and specific land requirements are negligible.

Fresnel

In Europe 1 plant based on the Fresnel principle is currently operating (1.4 MW) and another one is under construction (30 MW). The operating principle is the same as for the parabolic trough technology except that the mirrors are flat.

Introduction

Solar thermal systems are based on a simple principle known for centuries: the sun heats up water contained in a dark vessel. Solar thermal technologies are efficient and highly reliable, providing solar energy for a wide range of applications like domestic hot water and space heating in residential and commercial buildings, support to district heating, solar assisted cooling, industrial process heat, desalination and swimming pools.

Solar Domestic Hot Water and Space Heating


Even the simplest solar thermal systems can provide a large part of the domestic hot water needs. With some more initial investment, 100% of the hot water demand and a substantial share of the space heating needs can be covered with solar energy. Natural flow systems work without any need for pumps or control stations. They are widely used in Southern Europe. Forced circulation systems are more complex and can cover also space heating. They are more and more common in Central and Northern Europe.

Solar Cooling


A growing number of demonstration projects shows the huge potential for solar assisted cooling. Solar chillers use thermal energy to produce cold and/or dehumidification. When backed up by biomass boilers, 100% renewable cooling systems are possible. Solar cooling is at the edge of wide market introduction and substantial cost reductions can be expected in the next few years. The switch of peak electricity demand from winter to summer, caused by the exploding demand for cooling, is jeopardizing the stability of power supply. Peak cooling demand is associated to high solar radiation. Solar cooling will be a key answer to this challenge in the coming years.

Process Heat and Other Applications


Solar thermal can also provide the heat needed in many industrial processes, like food production and drying, desalination of drinking water, industrial laundries etc. While ordinary solar collectors typically provide temperatures of 60-100°C, concentrating collectors can reach temperatures of 300°C and beyond. In the lower temperature range unglazed solar collectors are an effective way to reduce energy demand for swimming pool heating.


Key Advantages:

Solar Thermal

  • is immediately available and inexhaustible– all over Europe and worldwide
  • is proven and highly reliable
  • allows system owners to save substantially on their heating bills
  • creates local jobs and stimulates the local economy
  • reduces the dependency on imported fuels
  • improves the diversity of energy supply
  • saves scarce natural resources
  • saves CO2 emissions at very low costs

A Growing Market


During the past twenty years, solar thermal markets have shown an extremely positive evolution. Often however, periods of strong growth are followed by sharp downturns, a trend which was also visible in the past two years, where an outstanding growth of 60% in 2008 was followed by a contraction of 10% in 2009.

With more than 4 million square meters of solar collectors sold in Europe in 2009 for the second year in a row, the solar thermal sector however still outperformed a market environment distinguished by struggling building industries in many European countries and the global economic crisis.

Although there is an obvious correlation between solar thermal markets, fuel prices and economic activity, the market stability in our sector remains highly affected by the diversified and inconsistent landscape that support policies for solar thermal technologies show across Europe. However, this is likely to be offset by the effect on national policies of the RES directive (2009/28/EC) implementation and also because renewable heat incentives are already firmly on the agenda in several European countries.

Reaching the critical mass for economies of scale


Today solar thermal is one of the most cost effective sources of renewable energy. People in the leading solar thermal countries benefit from higher solar value for money because reaching a critical mass of the market allows for high quality at better prices.
The potentials for further economies of scale in the areas of marketing, distribution, design and installation of the systems are substantial. In the collector manufacturing process, automation for large volumes is still in its beginnings.

Introduction


“Photovoltaic” is made up of two words: “photo” from Greek roots, meaning light, and “voltaic” from “volt”, which is the unit used to measure electric potential at a given point. Photovoltaic (PV) systems use cells made of semi-conducting materials to convert light into electricity.

Discovered by Edmond Becquerel in 1839, photovoltaic electricity undergoes its first real application as an energy source for space satellites. Even though certain applications were used for several decennia, the real commercial take-off of photovoltaic electricity connected to the electricity grid started at the dawn of the 21st century.

Status Today


In 2009, 7.2 GW of photovoltaic systems were installed all over the world. The PV market is expected to grow by 50 to 100% in 2010 with many countries starting to deploy PV intensively. At the beginning of 2010, more than 22 GW of PV systems were already installed in the world, delivering large quantities of electricity.

The contribution of PV to electricity production in Europe is steadily growing, with PV contributing significantly to peak power generation in many countries, notably in Spain and in Germany.

The cost of PV electricity is constantly decreasing, with PV price reduction being particularly significant in 2009 due to the scale effect and increased competition.

A sustained average of a 20% learning rate will drive prices down substantially over the next years and decades, a trend which will make PV electricity more affordable and grid parity (the point where the generation cost of photovoltaic electricity equals the price of electricity at the point of connection) a likely reality for most of European countries during the current decade. Grid parity is expected to be reached as early as 2011-2012 in some Southern European regions.

Outlook Tomorrow

In Europe


It can reasonably be assumed that photovoltaic electricity will become a mainstream power source in Europe by 2020 and a major power source in 2050. The “SET for 2020” study (www.setfor2020.eu) carried out by EPIA (European Photovoltaic Industry Association) with the support of the Consulting firm A.T. Kearney, outlines that, provided some boundary conditions are met, PV could supply up to 12% of the electricity demand in Europe by 2020, thus representing 390 GW of installed capacity and 460 TWh of electricity generation.

For 2030 to 2050, EPIA together with EREC has shown the high potential of PV within the RE-thinking 2050 scenario (www.rethinking2050.eu). Based on the intermediate “SET For 2020” scenario, PV could reach as much a 962 GW of installed capacity by 2050 in Europe. The potential of photovoltaic electricity could, however, be at least 50 % higher in Europe by 2050. Available land area and buildings in “zero impact areas” (i.e. areas not in competition with food production, natural reserves, housing, industry or other purposes) represents a potential of more than 5,000 TWh of yearly PV electricity production.

All assumptions are made on the basis of a conservative assessment of the performance evolution of current commercial technologies. With the expected evolution of technologies such as concentrated photovoltaics and nanotechnologies, even higher performance and higher electricity output by Wp (Watt peak) can be expected.

Introduction

The ocean is an enormous source of renewable energy with the potential to satisfy an important percentage of the European electricity supply. Conversion of the wave energy resource alone could supply a substantial part of the electricity demand of several European countries, in particular Ireland, the UK, Denmark, Portugal, Spain and Norway, especially on islands and in remote areas. The best ocean energy resources within the EU Member States are wave energy and marine currents, which have seen the most technological development. Salinity gradient systems are being developed in Norway and the Netherlands. Ocean Thermal Energy Conversion (OTEC) technologies are not yet available in Europe but can be harvested at latitudes closer to the Equator with technologies developed by European companies. The technologies used to exploit the different ocean resources (waves, tidal range, tidal stream/marine currents, salinity gradients and ocean thermal energy conversion) are quite diverse. They can be categorised according to their basic principles of conversion.

The different concepts for wave energy conversion can be onshore, near-shore and offshore and rely on several working principles (e.g. oscillating water columns – OWC). Tidal barrage technologies are similar to large hydropower dams, but adapted to ebb and flood tides. Marine current devices are less diversified than wave energy devices. They could use a range of working principles and they can either be rigidly mounted in the seabed, piled mounted, semi-submersible with moorings or attached to a floating structure. The technology to harness salinity gradient power uses the osmotic pressure differences between salt and fresh water or between water bodies of different salinity. OTEC relies on using the temperature differences between shallow and deep sea to drive a turbines.

Over the past few years, dedicated infrastructure for wave and tidal sea trials have been created in several European countries. They facilitate deployment of technologies from prototype to commercial phase by making cable connection available and / or simplifying the licensing procedure. At present, several grid connected test areas are under development, scheduled to be operational with the coming 1 to 3 years.

Status Today


At present, tidal barrage is the only ocean energy technology that has been operating for decades. La Rance, France was inaugurated in 1966 and has been exploited commercially ever since. Several wave and marine current technologies are currently in (full scale) demonstration stage. Salinity gradient and OTEC are still largely in R&D stage. However, the first salinity gradient prototype installation is operational since December 2009 (Statkraft, Norway). Although ocean energy R&D started decades ago, remarkable development has only taken place since the beginning of this century. Overall, ocean energy development is no longer limited to academic research. Recently, large companies, utilities and industrial consortia have started to invest substantially in ocean energy projects demonstrating the ambition of the sector. Political engagement is being demonstrated by Member States with high ocean energy resources by means of dedicated research funding programmes, support schemes and ambitious national targets.

The installed capacity in 2009 was approx. 250 MW. This included La Rance in France that has an annual production of 550 GWh. In terms of electricity production generated by the sector, ocean energy estimates the following: 0.62 TWh in 2010, 8.94 TWh in 2020, 150 TWh in 2030, 549 TWh in 2040 and 645 TWh in 2050. These assumptions are based on the development of offshore wind and assume saturation in 2050. In terms of cost, it has to be noted that the cost of ocean energy is very technology specific. Cost figures are still being developed as devices enter long-term energy production stage. The 2006 Carbon Trust report ‘Future of Marine Energy’ estimates the cost for wave energy to be between the equivalent of 0.1 to 0.65 €/kWh, depending on the full load hours, interest rates, depreciation period and operation and maintenance costs, as well as the different technologies. The cost of current prototypes are of the order of 3,500 to 13,000 €/kWh.

Outlook Tomorrow


Growth of the sector to 2020 is estimated by using an exponential curve that follows the growth since 1998 leading to projected installed capacity of 3,6 GW by 2020. Considering ocean energy faces similar challenges as the offshore wind sector, a similar growth curve has been used to project the 2030 and 2050 scenarios leading to a projected installed capacity of 54 GW by 2030 and 188 GW by 2050. Furthermore, it is considered highly likely that ocean energy will form synergies with offshore wind.

Technology specific Recommendations

Financial incentives:

Up to now, financing of ocean energy projects has been done mainly through financing of research projects. However, the real challenge for this sector is to demonstrate technologies that have advanced to the pilot and demonstration stage. Thus, more financing should be allocated to these stages of ocean energy projects at both national and EU level. R&D funding should address improvement of existing technologies rather than new concepts. The need to go from a single pilot device installation to farms with tens of MW calls for targeted investment in specific and ambitious projects. This requires large scale public–private partnerships. It is therefore recommended that policy makers put in place incentives for private bodies to invest in ocean energy technologies such as tax incentives.

Grid availability:

One of the main hindering factors for ocean energy expansion will be the availability and capacity of the offshore and coastal electrical grid. Unlike the offshore wind sector, which has been involved in the planning process for the grid expansion and development for many years, the ocean energy sector has difficulties to push in favour of its inclusion in grid development planning. Policy makers at both national and EU level have to ensure that all options for future offshore energy sources are taken into account.

Integrated Maritime policy:

Large scale deployment of ocean energy farms entails using a significant portion of the maritime area. The independent management of maritime space, with fair allocation of resources and transparent participatory procedure for allocation will therefore be crucial for the development of the ocean energy sector.

Introduction

For centuries civilisations have taken advantage of the power of water. Once used by the Greeks for grinding wheat into flour, the water wheels of the past have been updated to today’s highly efficient turbines that generate electricity by spinning water.

Small hydropower, defined by installed capacity of up to 10 MW, is the backbone of electricity production in many countries in the European Union. Small hydropower is based on a simple process, taking advantage of the kinetic energy and pressure freed by falling water or rivers, canals, streams and water networks. The rushing water drives a turbine, which converts the water’s pressure and motion into mechanical energy, converted into electricity by a generator. The power of the scheme is proportional to the head (the difference between up- and downstream water levels), the discharge (the quantity of water which goes through the turbines in a given unit of time), and the efficiency of the turbine.

Status today


In 2006 there were nearly 21,000 SHP plants (SHPPs) in the EU-27 and if candidate countries as well as Norway, Switzerland, Bosnia & Herzegovina and Montenegro are included, the number of SHPPs increases to a total of nearly 23,000.

The installed capacity of EU-27 was more than 13,000 MW – or more than 15,000 MW if candidate countries, Norway, Switzerland, Bosnia & Herzegovina and Montenegro are included.

In 2006 the total electricity generation from SHP in EU-27 was more than 41,000 GWh, and if including candidate countries, Norway, Switzerland, Bosnia & Herzegovina and Montenegro, nearly 52,000 GWh. This means that in 2006 about 1.2% of the total electricity generated as well as 9% of the RES-E in EU-27 came from SHP. On average, in 2006, a SHPP in the EU-27 had a capacity of 0.6 MW and produced about 2.0 GWh.

The range of investment cost can vary from 1,000 €/kW (Greece, Spain, Bulgaria, Czech Republic, Estonia) to 12,000 €/kW (Germany). In terms of average SHP production cost the range varies from 0.4 €cent/kWh (Bulgaria) to 17.4 €cents/kWh (Italy).

Outlook Tomorrow


The benefits and relevance of hydropower for both the renewable energy and the energy sector are obvious. In particular, hydropower will play a key role in 2030 and 2050 through:

  • Development of hybrid systems combining several technologies to guarantee the maximum energy production in the most efficient way.
  • Development of multipurpose hydro plants with applications in the fields of drinking water supply systems, irrigation channels, flood control and protection, the creation of adjoining environmental areas, waste water treatment plants and recreational purposes
  • Adding security and stability to the European grid thanks to the pump storage.
  • Mitigating Climate Change: for example SHP production reduces greenhouse gases such as CO2 by 29,000,000 tons annually and sulphur dioxide by 108,000 tons annually.
  • Supporting the development of rural areas by the installation on economically advantage conditions of SHP off-grid units.

Technology Specific Recommendations


Hydropower technology is already highly efficient and affordable (in terms of investment cost and internal rate of return); furthermore the technology has a long life span. Nevertheless, in order to achieve the forecasted vision of the sector for 2030 and 2050 or surpass these estimations the following issues must be tackled:

  1. Reconciling targets of the Water Framework Directive (WFD) and the RES Directive:The implementation of the WFD is currently restraining the present and future development of the sector, as the interpretation of the Directive at a national level is having direct consequences in terms of the approval of new projects and in terms of the allocation of concessions and permissions.
  2. Environmental measures: Hydropower needs a more objective approach from the environmental community and from stakeholders since current and future legislation could limit in a severe way the benefits of such a source of energy.
  3. Removal of administrative and regulatory barriers: Administrative procedures to get a hydropower plant operating are still one of the most important barriers for the sector. The long time periods required for obtaining licences, concessions and permissions discourage developers from bringing projects to an end. A more flexible, simple, centralised and homogeneous European system could ease the procedure.
  4. More attractive incentive regimes (especially in the new MS): Hydropower and in particular small units are currently benefiting from European support schemes. Nevertheless, in comparison to other renewables and comparing between countries, the level of support is not satisfactory in terms of cost-benefit and market competition.
  5. Need for proactive cooperation and better communication at a local level: In the case of hydropower projects, the rapid establishment of a participatory approach involving the different stakeholders affected by the realisation of the project and in particular the environmental and fishing community is a must for the future development of the sector.
  6. Investment in R&D and change of thinking: The hydropower technology of the next decades will evolve towards more sustainable solutions. However, in order to minimise the environmental impact while at the same time maximising electricity production, a change of thinking is required and investment in current and future R&D is highly recommended to explore and test different solutions.

Introduction

Per definition, geothermal energy is the energy stored in the form of heat below the earth’s surface. It has been used since ancient times for heating, and for about 100 years also for electricity generation. Its potential is inexhaustible in human terms, comparable to that of the sun. Beside electric power generation, geothermal energy is today used for district heating, as well as for the heating (and cooling) of individual buildings, including offices, shops, small residential houses, etc.

Geothermal-generated electricity was first produced at Larderello, Italy, in 1904. Iceland, Italy, Turkey and France are the leading countries in Europe today.

The largest geothermal district heating systems within Europe can be found in the Paris area in France, with Austria, Germany, Hungary, Italy, Poland, Slovakia and others showing a substantial number of interesting geothermal district heating systems. Sweden, Switzerland, Germany and Austria are the leading countries in terms of market for geothermal heat pumps in Europe.

Geothermal Power

Today, geothermal power plants exist on every continent, at any place were reservoirs of steam or hot water can be found. There are, with conventional technology, ca. 1000 MW of electric power installed in the EU, around the clock. The relevant resources are far from being fully developed, also in Europe. The concept of Enhanced Geothermal Systems (including the classical Hot-Dry-Rock-idea) is going to tremendously increase the potential.

Deep and directly

The earth is full of energy: virtually any temperature level in the underground can be used directly, for instance with deep boreholes. Did you know that through deep boreholes almost 4500 MWth are already installed in Europe? 4500 MWth for a clean environment. However, once again, this is only a small fraction of the resources that could be exploited.

The Shallow Geothermal Family

Virtually every temperature level in the underground can be used for geothermal energy, even if this means only ca. 3-15°C, as is the norm in the shallow underground of European climate. In most cases a heat pump is required here, and cooling can be supplied as well as heating.

Geothermal Energy: A Local Answer, Ecological and Efficient, to Reduce Energy Costs

A Renewable Energy:

  • an energy resource nearly infinite, delivering heat and power 24 hours a day throughout the year, and available all over the world
  • energy supply by making use of the immense internal heat of the earth, and of the large thermal storage capacity of the ground
  • friendly for the environment: contribution to the reduction of CO2
  • very low visual impact - most of the infrastructure can be hidden beneath the ground

A Safe and Controlled Technology:

  • not depending on climatic conditions
  • proven and controlled technically: design, drillings,
  • components (power plants, district heating, heat pumps)
  • excellent feedback from leading countries

An Energy Adaptable with High Performance:

  • an answer to different energy needs: electric power, heating, cooling, hot water
  • modulated according to type of resource, to size and nature of equipments, and in order to meet demands
  • for the heating sector: adaptable to old or new buildings, large or small, individual or district heating

An Economically Sustainable Energy:

  • large reduction of energy invoice
  • long-term durability of installations
  • not sensitive to conventional energy prices - the earth will not send an invoice!


Bioenergy


Introduction

Bioenergy can play an important role in combating climate change as well as improving the security of energy supply in Europe. However, biomass for energy is a complex matter, as there are many different biomass-to-energy-value chains.

Sources of raw material include:

  • forests (firewood and round wood) and agriculture (cereals, sugar beet and cane, oilseeds, short rotation coppices or energy grass)
  • wood industry by-products (residues, bark, saw dust, shavings, chips, pellets, black liquor etc.) and agricultural by-products (straw, manure, fruit wood etc.)
  • waste streams (used cooking oils, animal by-products, residues from starch processing)


The final energy can be used for heat, electricity and transportation fuel. Many different conversion pathways from feedstock to final energy exist today, such as small scale combustion, large industrial combustion units, gasification, pyrolysis, steam process, Organic Rankine cycle (ORC) process, fermentation, and esterification. In order to achieve development in the bioenergy sector over the coming years, there is a real need for a favourable policy environment to bring new technological and scientific advances to the market.

Status Today


The RES Directive laid down a 20% RE target for 2020 and therein stated that 10% of final energy consumption in 2020 would have to come from for renewable transport fuels. With these targets in mind, it is evident that a range of bioenergy technologies need to be deployed over the coming years in order to meet those targets. Experts believe that biomass is likely to contribute half the 20% renewable energy target. Today 61 Mtoe of biomass is used as final heat, main raw material fire wood, chips, pellets and other by-products, 9 Mtoe as electricity and 8 Mtoe as biofuel.

In efforts to achieve competitiveness, the renewable energy industry is today faced with technological and economic challenges. In addition to these general challenges, bioenergy is confronted with pressing and controversial questions relative to its feedstock. The competition with other uses of biomass (i.e. energy vs. food), and requirements for sustainable bioenergy production, now dominate discussions. It should, however, be pointed out that both the bioethanol and biodiesel production chain have protein-rich animal feed as a by-product, meaning that biofuel production does not compete with animal feed, in fact it would help reduce the import of often unsustainable animal feed from other parts of the world.

Outlook tomorrow


Future development depends to a large extent on the economic framework created by Member States. The leading principles for the further development of bioenergy in future energy systems are sustainability, efficiency and competitiveness. Bioenergy has to bring to commercial maturity the most promising technologies that fit these principles. Developing a longer term R&D programme to support the bioenergy industry beyond 2020 and looking towards 2050 is a key parameter for the success of the sector.

The topics that will affect R&D in the area in the coming years are the development of new feedstock, the integration of bio-energy into supply structures with new conversion technologies, monitoring conversion and biogas technologies, modelling of the bioenergy value chains, the development of digestion technologies and the development of both consulting and training programmes.

The technologies that have the biggest market potential and are already developed and robust are co-firing of biomass and combustion of biomass by Combined Heat & Power (CHP), as well as biofuels, as alcohol and oils have been produced on an industrial scale for many decades. At this moment in time, the weakest technology is bio-hydrogen production, however, it may well have a great market potential following development in the coming years. As far as biofuels and bioliquids are concerned, their market share will be increased with the introduction of advanced biofuel products and as bioliquids are produced for the aviation sector, as well as for inland navigation and heavy duty vehicles.

When thinking of the power system in 2050, many options are currently being discussed on how to integrate fluctuating renewable energy sources, for example via virtual power plants (i.e. real power plants of different nature and energy storage devices all interconnected and distributed into the power system through information and communication technology (IC T) and different transmission and storage options on the supply side and demand side management on the energy customer (end-use) side. Bioenergy is an attractive solution to the challenge of integrating renewable energy in the electricity grid. It is a renewable energy source with the properties of fossil fuel (high energy densities) and is as such stored chemical energy. It is therefore suitable to substitute fossil fuels in the transport sector and in the heat and power sector. Bioenergy is also of interest as a balancing power. Electricity production based on biomass should be concentrated on combined heat and power (CHP) plants of different sizes. Micro CHP still has to be developed for the market. CHP offers high efficiency, but requires in many cases new DH grids.

In the future, more than two thirds of the contribution of bioenergy to the final energy consumption in Europe could be in the heating sector. This would require the heating systems in tens of millions of houses to be changed, the building of many district heating systems (large and small), and the change of the heating system in many companies of the production sector. The technology is available – efficient and low emission wood logs, wood chips and pellet boilers/stoves for small scale applications and DH plants running on various biomass fuels.

Biofuels are important to improve the sustainability of the transportation sector. Current biofuels, mainly from Europe, should maintain an important position, as they can save up to 88% greenhouse gas emissions compared to fossil fuels and their production delivers almost double the amount of protein feed (defined in energy units), as liquid fuels. Advanced biofuels will continue to increase their market share. Bio-refineries contribute sustainable processing of biomass into a spectrum of marketable bioenergy products and they will develop over the coming years and will have an important role in a 2050 strategy. Biofuels offer the possibility of having multiple energetic and non-energetic products from a mix of biomass feedstock (wood, energy crops, organic residues, aquatic biomass, and waste).

Technology Specific recommendations


Firstly, there is a need for multi-disciplinary scientific knowledge, so that a mixture of technologies can be developed that are adapted to individual energy issues. The setting up of an efficient network of EU Centres of Excellence, with the aim of collecting information on the bioenergy sector, helping the communication between stakeholders and disseminating information on a variety of relevant issues, will be key to achieving the bioenergy objectives set out above. Last but not least, international collaboration is very important.

  • Sustainable biomass is limited and therefore a focus should be on the strategic functions of biomass in future energy systems, in particular balancing power demand with fluctuating renewable sources;
  • BioSNG/Biomethane seems the most promising target function of biomass in the long term;
  • Rapid development of small scale CHP and of advanced biofuels;
  • Financial support programs for DH, for private house owners and small companies to switch from fossil fuels to biomass for the heat supply;
  • Program to better combine solar thermal and biomass;
  • Training of plumbers for this new combined use of RES;
  • 40% of all investment to change the energy system to renewable has to be realized in private houses or companies – better support program for this kind of investment is urgently needed.


Projects that will be important in the coming years in the sector of biomass/bio-fuels that currently form the technology roadmap of the European Industrial Bioenergy Initiative (EIBI) are:

  • Lignocelluloses to intermediate solid with pyrolisys
  • Lignocelluloses to intermediate solid with torrefaction
  • Lignocelluloses to synthetic gas via gasification
  • Lignocelluloses to bio-fuels via gasification
  • Lignocelluosic to bio-fuels via pyrolisys and torrefaction
  • Lignocelluloses (household waste) to biogas via chemical and biological processes
  • Algae or micro-organism to bio-fuels/bioliquids via biological and chemical processes

CCRES following non-profit associations and federation:


European Biomass Association

European Geothermal Energy Council

European Photovoltaic Industry Association

European Renewable Energies Federation

European Small Hydropower Association

European Solar Thermal Electricity Association

European Solar Thermal Industry Federation

European Biomass Industry Association

European Ocean Energy Association

European Association of Renewable Energy Research Centres

European Wind Energy Association

More info at: solarserdar@gmail.com.

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)

srijeda, 27. srpnja 2011.

WATER CHANGES EVERYTHING

CROATIAN CENTER of RENEWABLE ENERGY SOURCES

promotes


WATER CHANGES EVERYTHING.


Video animation by Jonathan Jarvis. Voice by Kristen Bell.
Score and sound effects by Doug Kaufman.




WHY WATER?



Learn about the water crisis small_arrow





health and sanitation.Diseases from unsafe water and lack of basic sanitation kill more people every year than all forms of violence, including war. Children are especially vulnerable, as their bodies aren't strong enough to fight diarrhea, dysentery and other illnesses.

90% of the 30,000 deaths that occur every week from unsafe water and unhygienic living conditions are of children under five years old. Many of these diseases are preventable. The UN predicts that one tenth of the global disease burden can be prevented simply by improving water supply and sanitation.





A clean water project nearby means more than safe drinking water to women and children in developing nations; it means time, freedom and incentive to change their communities.




women and children.In Africa alone, people spend 40 billion hours every year just walking for water. Women and children usually bear the burden of water collection, walking miles to the nearest source, which is unprotected and likely to make them sick.

Time spent walking and resulting diseases keep them from school, work and taking care of their families.

Along their long walk, they're subjected to a greater risk of harassment and sexual assault. Hauling cans of water for long distances takes a toll on the spine and many women experience back pain early in life.

With safe water nearby, women are free to pursue new opportunities and improve their families’ lives. Kids can earn their education and build the future of their communities.





economies / communities.In Africa alone, the overall economic loss due to lack of safe water and sanitation is $28 billion, or about 5% of GDP. In areas where gathering water is impossible, small-scale private water distributors charge full market prices, forcing the poorest households to spend up to 11% of their income on life's most basic need. Even this water is most likely contaminated if it has been collected from unprotected rivers or ponds.


Water is an astonishingly complex and subtle force in an economy. It is the single constraint on the expansion of every city, and bankers and corporate executives have cited it as the only natural limit to economic growth.
- Margaret Catley-Carlson, Vice-Chair, World Economic Forum


food supply.Feeding our world takes up to 90% of our freshwater withdrawals but many people in developing nations still don't have access to enough water for irrigation. When a water project is built in a community, members can often use the new water source to grow small gardens near their homes and secure their own food supply. Self-sufficient households are less affected by external conflict, famine or inadequate government services.


gender equality.All members – men and women -- are engaged in the construction and maintenance of their charity: water projects. When complete, 6-10 community members are appointed to the Water Committee and are responsible for overseeing the functionality of the water point. Water Committees are often the first chance for women to step into elected leadership roles. This new responsibility can restore dignity, initiative and equality to community members.


the future.charity: water served its first one million people at the end of 2009. That’s a major accomplishment, but we have much more work to do. By 2050, the world's population is estimated to grow by three billion and 90% of this growth will be in the developing world. Unless sustainable water solutions are scaled fast, regions already stressed for safe water sources will be over capacity. We’re expanding our reach to meet these demands and will not stop until every person has safe water to drink.




The walk for water that used to take everyone here three hours, now takes 15 minutes. And the water is safe to drink.




A hygiene worker teaches your village the importance of sanitation. Your community builds latrines and sets up handwashing stations.




You join the Water Committee to oversee your village's new water source. As a woman, this is your first local leadership position.




You use the extra time and new water source to start a vegetable garden and feed your family. You sell your extra food at the market.




Your kids spend more time in school instead of walking for water. They graduate to become teachers, hygiene workers or business owners.




A nearby village learns how water transformed your community. They petition for a well in their village, and the cycle starts again.






water as a catalyst: disease prevention.charity: water focuses on life’s most basic need -- water. But to significantly cut down disease rates in the developing world, water is just the first step. Almost everywhere charity: water builds a freshwater well, we also require sanitation training. In some communities, we build latrines; at the very least, we promote simple hand-washing stations made with readily-available materials. Clean water can greatly alleviate the world’s disease burden, but only with education and hygienic practice. charity: water is committed to using water as a gateway to sanitary living.



adding it up: the return.
every $1 invested in improved water access and sanitation yields an average of $12 in economic returns, depending on the project.Even in regions prone to natural disasters, water infrastructure has proven to be a smart investment, sometimes reducing flood damage or disease rates among survivors. Clean water transforms lives, communities and generations -- and at a surprisingly low cost. $20 can provide clean water for one person.


how you can help.



mycharity: water is a website where you can create fundraising campaigns and collect donations. Every dollar raised is tracked to a water project.




100% of your donation will directly fund freshwater projects in developing nations. Just $20 can give one person clean, safe drinking water.




By wearing charity: water gear, you help spread the word about the global need for clean water. The profits help us continue to use 100% of donations to water projects.

More info at:solarserdar@gmail.com

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)

NEWS and EVENTS by CCRES




CROATIAN CENTER of RENEWABLE ENERGY SOURCES

July 27, 2011

News and Events

DOE, Defense Department to Install Fuel Cells on Eight Military Bases

Photo of two square boxes against a biulding.

A DOE-Defense Department agreement will support the use of fuel cells, like these at a Coca-Cola Refreshments bottling facility, on military sites.
Credit: UTC Power

DOE announced on July 19 that the U.S. Department of Defense (DOD) will install and operate 18 fuel cell backup power systems at eight military installations across the country as part of an interagency partnership with DOE. The eight installations include the U.S. Marine Corps Air Ground Combat Center 29 Palms in California; Cheyenne Mountain Air Force Station in Colorado; Aberdeen Proving Ground in Maryland; Picatinny Arsenal in New Jersey; the United States Military Academy at West Point, New York; Fort Bragg in North Carolina; the Ohio National Guard in Columbus, Ohio; and Fort Hood in Texas. The projects will test how the fuel cells perform in real world operations, identify technical improvements manufacturers could make to enhance performance, and highlight the benefits of fuel cells for emergency backup power applications.

A fuel cell works like a battery that is constantly kept charged by feeding a fuel such as natural gas or hydrogen into its anode, or negative terminal. Compared with diesel generators, which are often used for backup power, fuel cells use no petroleum, are quieter, and produce fewer pollutants and emissions. Fuel cells also typically require less maintenance than either generators or batteries do, and they can easily be monitored remotely to reduce maintenance time. The primary challenge facing currently available fuel cells is the higher first cost for the units, compared with the first costs of conventional technologies they replace. Targeted fuel cell demonstrations such as this one may increase the scale of deployment and help improve the economics of the technology, which could lead to more widespread adoption and use.

The projects will be conducted under a memorandum of understanding (MOU) signed by the two departments in July 2010. LOGANEnergy will manage the project, using fuel cells from ReliOn, Inc.; Altergy Systems; Idatech, LLC; and Hydrogenics Corporation. The $6.6 million project is a joint effort of DOD's U.S. Army Corps of Engineers and DOE's Office of Energy Efficiency and Renewable Energy. DOD will manage the project, and DOE's National Renewable Energy Laboratory (NREL) will collect performance data for the first two years of the five-year demonstration. The NREL data will be available to fuel cell developers and commercial and government leaders interested in adopting this technology. See the DOE press release, the MOUPDF, and DOE's Fuel Cell Technologies Program website, which includes a basic description of how a fuel cell works.

DOE to Award $6.3 Million to 31 Clean Energy Projects on Tribal Lands

Photo of large wind turbine with a Native American headdress in the foreground.

DOE will help Tribal Nations expand their use of clean energy, like the Rosebud Sioux did on their South Dakota Reservation with this wind turbine, shown during a powwow.
Credit: Robert Gough

DOE announced on July 21 that 31 tribal energy projects will receive $6.3 million over two years as part of DOE's ongoing efforts to support tribal energy development and continue strengthening the partnership with Tribal Nations. These competitively selected projects will allow Native American tribes to advance clean energy within their communities by developing strategic energy plans, expanding the skills and knowledge of tribal members, and improving the energy efficiency of their buildings.

The investments will help tribal communities save money and reduce energy waste, expand the use of clean energy technologies, and promote economic development. The funding will go to tribes and tribal organizations in 13 states: Alaska, Arizona, California, Idaho, Michigan, Montana, Nebraska, Nevada, New York, North Dakota, Oregon, Washington, and Wisconsin. See the DOE press release, descriptions of the projectsPDF, and DOE's Tribal Energy Program website.

DOE Offers Support for Student-Focused Clean Energy Business Contests

DOE on July 21 announced $2 million in funding to support up to six regional competitions that will inspire, mentor, and train students from across the country to develop successful business plans for a new generation of U.S. clean energy companies. Under a new nationwide initiative called the National University Clean Energy Business Challenge, regional competitions will take place before May 1, 2012. Winners of the regional competitions will compete for a national grand prize at DOE headquarters in Washington, D.C., in early summer 2012. This national initiative will enable student participants to gain the skills required to build new businesses and transform promising innovative energy technologies from U.S. universities and national laboratories into innovative new energy products that will solve our nation's energy challenges.

For its new funding opportunity announcement (FOA), DOE will consider applications that propose annual university-based business creation competitions for student entrepreneurs with business ideas in energy efficiency and renewable energy. Student teams that participate in the competitions will work with experienced mentors from the energy industry and start-up community, along with university and national lab-based researchers, to develop creative business plans for transforming groundbreaking energy technologies into high-impact market solutions. The new initiative, facilitated by DOE's Office of Energy Efficiency and Renewable Energy, aims to increase the number and quality of start-up businesses created with university-based energy technologies and to promote a new generation of energy entrepreneurs. Applications are due August 22, and DOE expects to make its selections before the end of September. See the DOE press release and the FOA, which is posted on the FedConnect website.

DOE, Ad Council Launch Energy-Saving Campaign for Consumers

DOE and the Ad Council launched a national consumer education campaign on July 19 to help consumers save money on utility bills. Created pro bono by Texas-based advertising agency GSD&M, the public service advertisements (PSAs) aim to help consumers save money on their energy bills by doing things such as sealing leaks in their homes and using energy efficient products. The PSAs direct homeowners to DOE's Energy Savers website, where they can find tools and information to help them make their homes more energy efficient. Following the Ad Council's model for public service promotions, the announcements will be distributed to media outlets nationwide and they will air in advertising time and space that are donated by the media. See the DOE press release, and to see energy saving tips and the ads prepared for the campaign, visit EnergySavers.gov.

Award-Winning Solar Silicon Ink Supported by SunShot's PV Incubator

We're all familiar with the award ceremonies for our favorite movie, music, and television stars, but what about the scientists and entrepreneurs helping us innovate our way to a clean energy future? What recognition do they get for their outstanding work?

Every year R&D Magazine presents what they call the R&D 100 Awards. Often referred to as the “Oscars of Innovation,” the awards are given to the top 100 innovative technologies, processes, and materials with promising commercial applications. The magazine recently announced that a Photovoltaic Technology Incubator- supported silicon ink technology developed and refined at DOE's National Renewable Energy Laboratory was one of three solar technology projects supported by the lab to have won a 2011 R&D 100 award (and one of 36 that resulted from DOE's investments in R&D). See the Energy Blog post.

Where to Build in New York City? Team New York Looks Up

New York City's famously dense urban landscape presents a challenge to developers hunting for a bit of unoccupied space to build on. Team New York in the U.S. Department of Energy Solar Decathlon 2011 believes it has identified the most underutilized real estate in the entire city—flat rooftops, where space and access to sunlight are plentiful.

More specifically, the Solar Decathlon team, composed of architecture and engineering students from The City College of New York, has designed a house for rooftops of mid-rise buildings—both residential and commercial. The students envision their house, dubbed the Solar Roofpod, as a prototype that can be replicated in densely populated areas around the country. See the Energy Blog post.

More info at:solarserdar@gmail.com

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)

ponedjeljak, 25. srpnja 2011.

Where photovoltaic cells come from?

CROATIAN CENTER of RENEWABLE ENERGY SOURCES


Where photovoltaic cells come from, who made the very first ones, why they make power, and what you get for your investment in solar electric systems. It all starts with a silicon sandwich.





How much of the Sun's energy can be harvested? Is solar truly the most sustainable power source?
Visit the Googleplex, home of Google.com, to find out.




More info: http://solarserdar@gmail.com

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)

nedjelja, 24. srpnja 2011.

Sustainable Consumption





SUSTAINABLE Consumption by CCRES


Some 2 billion new consumers will have joined the global middle class by 2030, bringing almost 80% of the world's population into a "consumer" bracket. Providing for the next generation of consumers in a sustainable manner presents an enormous opportunity for global companies.

In the search for solutions, leaders must navigate a complex network of systems interlinkages, difficult trade-offs and powerful feedback loops within the political, business and natural environments. In this context, it is time to use sustainability as an innovation platform that helps to reinvigorate the global economy, aligning sustainability with improved living standards less reliant on consumption of natural resources.

Leaders can position themselves to succeed in this changing framework by redefining their strategies, products and services, and redesigning value chains to embrace "absolute sustainability".

The World Economic Forum's Sustainable Consumption Initiative consolidates discussions on sustainability in a way that is relevant to industry. The initiative aims to catalyze collaborative action by embracing a common vision of sustainable consumption and developing shared ideas to integrate this into business practice.

Over 100 consumer industry executives and experts in sustainability, business strategy and product design took part in workshops to explore these themes presented in the report Sustainability for Tomorrow’s Consumer: The Business Case for Sustainability.
Recognizing that the issue of sustainability cannot be adequately addressed by any single company or even a single industry, the Forum has brought together leading companies from the following sectors: Chemicals, Energy, Food & Beverage, Logistics & Transport, Media, Investors, IT & Communications, and Retail & Consumer Goods.

This led to the next phase which developed a shared vision to place sustainability at the heart of business models for industries at all stages of the value chain detailed in the report Redesigning Business Value: A Roadmap for Sustainable Consumption.

Looking at product life cycles through the lens of sustainability, there are many hurdles which are common both along and across value chains. Some of these hurdles can be looked at as “collaboration hotspots”, where multiple stakeholders can work in tandem to develop systemic solutions. In consultation with stakeholders of the project, three focus areas that presented immediate and significant opportunities across the value chain were selected and working groups set up.

The Driving Sustainable Consumption project is managed by the World Economic Forum and is led by a diverse Project Board of Industry Partner companies, including:
Alcoa Aegis Media Agility, Best Buy, Deloitte, Edelmann, Henkel S.C., Hill & Knowlton (WPP), Kraft Foods, METRO, Nestlé, Nike Inc., Novozymes, Publicis Groupe, SAP, SAS, Johnson & Son, Sealed Air Corp., Unilever, Wipro.

It is commonly stated that the mining and metals industry’s environmental and social performance is under increasing scrutiny from NGOs. Not only civil society in fact. The media, financial analysts, business partners, investors, shareholders, “conscientious consumers”, etc: Today everybody wants to participate to a greener world, somehow. There's much talk of capitalism and sustainability being increasingly interrelated - that environmental and social impacts need to be included along with quarterly sales projections in corporate strategies and the financial bottom line. In fact, participation of the private sector to the global effort of reducing poverty, combating biodiversity loss, global warming, etc. is perceived by the general public as a new legitimate corporate value. They are many other individual business reasons for the mining industry to adopt responsible practices with respect to environmental and social management: access to land, reputation, which links to “licence to operate”, access to capital. As the ICMM Secretary General puts it: “demonstrating a commitment to biodiversity conservation is now an essential element of sustainable development for the mining and metals industry”.

Of course this is not a matter of “greenwashing” and communication only. Serious innovation efforts and entrepreneurship courage is necessary to create sustainable policy environments. Compensations measures, such as building schools or hospitals, in addition to normal compliance with laws and regulations in place, does not appear sufficient to shows company’s commitment to participate to that necessary global effort. It even sometimes looks like an odd present, like “disconnected” from real life.

Innovation however, and the strategically combined use of « Sustainable Consumption and Production » tools and instruments, which we briefly make a description below, gives companies the opportunity to show an integrated commitment to real life. Offering solutions, creating the momentum, fixing the headlines, can even helps them staying away of problems. Some companies even manage to pave the way to NGOs and other policy makers towards putting in place new practical tools, policies and expressions of environmental and social sustainability. Because they see the voluntary rules and norms more as a business opportunity then as a constraint probably.

In addition to the enforcement of “classic” state control regulations (such as environmental and social impact assessment, pollution control, social policies, etc., which are well-known) and certification measures, an honestly used and balanced mix of the third generation of sustainable management tools can put a company, its clients, partners, investors, shareholders, etc. in a virtuous position.

Companies tend to focus on their employees and on the surrounding local communities. But it should also consider a range of government and multilateral institutions with an interest in or responsibility for the management or protection of natural resources, investors or providers of insurance, conservation interests, including international, national or local NGOs as well as academic or research institutions. Even the consumer can feel involved in social management (see the backstory approach below).

Environmental policy tools: finding the good mix

These approaches are not adapted to all kind of activities. Each company shall strategically focus on one or more complementary instruments, depending on it’s own corporate culture and on the host country culture. They include regulatory tolls, economic tools, tools based on information and education and communication tools:

Regulatory and contractual tools (compulsory or voluntary) :

· « Environmental impact assessments » and « social impact assessments » ;

· Standards and norms for production, wastes, water quality, dust, air pollution… but also for distribution and products quality. No need to put more emphasis on these first generation of “command and control” type of norms ;

· Voluntary and negotiated (contractual) instruments. Whether concluded with communities, administration and other local stakeholders or with business partners: distributors, transport, etc. This is an interesting solution because a highly flexible instrument. In the first case, they can include management plans. In the second type, social and environmental aspects can be specified.

Economic instruments:

· Voluntary taxes (on production, transport, etc. such as the payment of carbon credits to compensate the company’s « carbon footprint »). The idea is to give sense to money, then corresponding to a global cause, while helping local people. It can be externalized and given to an international conservation organisation, to projects, to foundations, etc. These funds can also be versed to the company own projects. We could for example think about the making of a marine protected area for a fishing industry, or the making of a community conserved area for a local factory, the investment in acres of protected forest (carbon sinks) in Brazil for a mining company, etc… ;

· Green public procurement: They consist in buying green technologies for the company itself, such as solar systems, clean and energy efficient buildings, the use of recycle paper, bio-ethanol propelled machines, etc. This way, products, infrastructures and services have already « internalised the environmental costs ».

Tools based on information and education:

· Making of “sustainability reports”: The company regularly informs the public, partners, and shareholders on its green and social performances ;

· Diverse guaranties on the origin of the product used and on the processes. For example, companies are finding themselves held responsible for the whole backstory of their products (as illustrated by the film “blood diamonds”). “A product's backstory is everything that happened to get the object or service to us, everything that will happen behind the scenes while we use it, and everything that will happen after it leaves our lives.

· Fair trade networks ;

· Labels, such as the « Forest Stewardship Council Label (FSC) » for wood. These labels can also guaranty the respect of social norms ;

· Certification; a whole array of industries are now coming into compliance with third-party accountability systems that certify whether or not that company's actions meet basic environmental and social standards ;

· Traceability of products and processes, etc.

Conclusion

The choice of appropriate measures, their combination and their timely implementation are crucial. It should be tailored to the company’s culture as well at to the local demand and international trends. Selected tools and procedures should first of all be enrooted in country’s culture and practices. For example, when managing natural resources and social aspects in Senegal, negotiation and concertation of all the stakeholders is a key to success. We could imagine setting up such a concertation group as a basis for some policy work done or implementation of a global management, with projects, etc. In addition, communication should not only be top down but also bottom up to account for and recognize diversity of interests involved. Use of local language is important as well as sensitization and capacity building. Use of local or national external organisations (such as facilitators) can help developing a spirit of trust and collaboration, etc. In a word: the processes and communication are as important as the tools used.

One solution is to go step by step, by conducting a feasibility study and by testing different tolls in combination, probably with a good balance between the three kinds of instruments (regulation, economic, information) to progressively reduce the company’s environmental footprint.


Selected bibliography

- Benefit Streams from Mining in Tanzania: Case Studies from Geita and Mererani. Siri Lange in cooperation with ESRF, Chr. Michelsen Institute (R 2006: 11) ;

- Good Practice Guidance for Mining and Biodiversity, published by International Council on Mining and Metals (ICMM in association with IUCN), London, UK, 2006 ;

- Transparency and Accountability in Africa’s Extractive Industries: The Role of the Legislature, edited by Shari Bryan & Barrie Hofmann, National Democratic Institute for International Affairs, W DC, 2007 ;

- The impact of extractive industry activities on the rights of local communities ASADHO /Katanga, NIZA briefing paper 2007 ;

- Undermining Communities and the Environment: A Review of the International Finance Corporation’s Environmental, Health and Safety Guidelines for Mining, Bank Information Center – Center for Science in Public Participation – Earthworks – Oxfam International – WWF International, September 2007 ;

- A mine of information? Improving communication around the Rio Tinto ilmenite mine in Madagascar, Panos London, October 2007;

- Mali, Mining and human rights. International fact-finding mission report, FIDH, September 2007 ;

- Carbon footprints in the supply chain: the next step for business, the Carbon Trust, UK, 2007 ;

- The Trade and Environmental Effects of Ecolabels: Assessment and Response, UNEP (date ?) ;

- The use of economic instruments in environmental policy : opportunities and challenges, UNEP, 2004 ;

- A legal framework for the integration of environmental, social and governance issues into institutional investment, UNEP finance initiative, 2005 ;

- Defining Global Business Principles: Options and Challenges, IIED, 2004.

More info at :solarserdar@gmail.com

CROATIAN CENTER of RENEWABLE ENERGY SOURCES (CCRES)